| Error | Symptom | Solution | | :--- | :--- | :--- | | | The flasher says the file is for a different model. | You downloaded the Convertible Minitower BIOS by mistake. The SFF board is slightly different. Double-check your Product Number (on the sticker: e.g., AU174AV ). | | "Insufficient Memory to Flash" | Error appears in DOS. | You have too many USB devices plugged in. Unplug keyboard/mouse (use PS/2 if possible). Remove extra RAM sticks (leave 1 stick in slot 0). | | Fan runs, black screen after flash | The PC turns on but no display. | This is often the DisplayPort vs. VGA issue. The BIOS reset to default output. If you are using a VGA monitor, switch to a DVI or DisplayPort monitor temporarily, or reset CMOS. |
| Error | Symptom | Solution | | :--- | :--- | :--- | | | The flasher says the file is for a different model. | You downloaded the Convertible Minitower BIOS by mistake. The SFF board is slightly different. Double-check your Product Number (on the sticker: e.g., AU174AV ). | | "Insufficient Memory to Flash" | Error appears in DOS. | You have too many USB devices plugged in. Unplug keyboard/mouse (use PS/2 if possible). Remove extra RAM sticks (leave 1 stick in slot 0). | | Fan runs, black screen after flash | The PC turns on but no display. | This is often the DisplayPort vs. VGA issue. The BIOS reset to default output. If you are using a VGA monitor, switch to a DVI or DisplayPort monitor temporarily, or reset CMOS. |